SeaSun LED Digital Aquarium Alarm Thermometer AT-2

1.Specifications :
* Inside tank temperature display
* Highest / lowest temperature alarm function (Default setting: highest +34C°; lowest +15C)
* LED alarm indicator light
* Temperature unit °C/°F changeable
* Temperature Range : -10°C to +60°C (+14°F to +140°F)
* Power-supply : 3V (CR2032) x 1

2.Operations :
1. Take out the battery insulator, Peel off the film from the sticker on the back, stick the thermometer on the outside of the aquarium tank, make sure it is below the water level (don't put it into the water). Wait for 10 minutes to get the accurate reading.
2. To check the fish tank's water temperature, please touch the button to turn on the device, then it displays the temperature, the device will enter the energy-saving sleep state automatically in 40 seconds. Repeat the above operation when checking the water temperature again. Long touch the button to exchange the temperature unit °C/°F.
3. When the water temperature is lower than +15°C (+59°F), the blue LED light and temperature data flash for 10S; when the water temperature is higher than +34°C (+93°F), the red LED light and temperature data flash for 10s; If the water temperature does not change, flash every 15 minutes for 10s, and stop alarm after repeating for 3 times.
4. When the battery has run down, please remove the device from the fish tank and open the battery compartment on the back to replace the new battery, then stick the thermometer back to the fish tank and continue to use it.

MADE IN CHINA CE

Brand : No Name
Model : AT-2
Voltage : 3v DC
Power : 0.0001w
Resolutions : 0.1°C / 0.1°F
Product Size : 48mm x 10mm x 28mm
Package Size : 67mm x 15mm x 125mm