Search by Brand
zzz>>>>>>>>>>>>>>>>>>>>>>>>>>>> Brightwell Aquatics
Brightwell Aquatics (Filter Media) RegeneratPhor 1000ml
Brightwell Aquatics (Filter Media) PhosphatR 250mlBubble-Magus (Impeller) Pin Wheel Impeller Rock SP 600View Full-Size Image |
Brand:( Brightwell Aquatics ) Product Name: Brightwell Aquatics (Filter Media) RegeneratPhor 1000ml SKU: Brightwell Aquatics RegeneratPhor 1000ml Barcode Link: Price:
Baht 980.00
| |||||
|
||||||
Availability
In Stock: 1 |
||||||
Barcode 810086011421 Description Overview 175 ml size 8 times 250 ml size 6 times 500 ml size 3 times Instructions and Guidelines Regeneration must be performed in a vessel outside of the aquarium; failure to follow this guideline will result in changes to aquarium water chemistry that can be extremely harmful, if not fatal, to aquarium inhabitants. The solution that is made by following the instructions below has a relatively high pH and should be handled carefully. It is strongly recommended that protective eyewear and rubber gloves be worn as a precautionary measure. For each 250 ml of resin to be regenerated: In a clean 1-gallon bucket or pail, thoroughly mix 200 g (~¾ cup) RegeneratPHOR with ½ gallon hot tapwater. Regeneration efficiency is directly related to reaction time between the resultant solution and the PhosphatR resin. The ideal set-up for regeneration is to place resin inside a mesh bag (if not already in one) and place the bag inside the mouth of a large funnel; funnel size must be large enough to contain entire bag and contents. Alternately, an empty ½ gallon LDPE plastic milk jug can be used by cutting off the bottom, placing a small hole in the cap, screwing the cap on tightly, turning the jug upside down, and placing the bag of resin inside the large opening. Next, slowly pour the RegeneratPHOR solution through the resin; the size of the hole through which the solution drains will help regulate the time of reaction with the resin (smaller is better). The solution should be discarded once it has been passed through the resin. Then, repeat the basic steps, substituting twice the volume of purified water for the RegeneratPHOR solution used, discarding the water once this step is completed. The PhosphatR resin must be thoroughly rinsed with purified water before resuming use in an aquarium. Once the PhosphatR resin has been rinsed, it is once again ready for use in an aquarium system as instructed on the PhosphatR label. Notes: Ingredients Inorganic salts of carbonate and chloride |
||||||
Number pieces in packaging:1 Number pieces in box:12 |
||||||
Customer Reviews:There are yet no reviews for this product.Please log in to write a review. |
||||||
You may also be interested in this/these product(s) |
||||||