Jeneca AH-10000DC NEW 2023
Hi quality materials
---Silicone Sealing
--- Earth Magnet
--- Acrylic Impeller
---ABS body
Safety Systems
--- Auto power off when no water
--- Auto power off when impeller jammed.
--- Auto power off when overheating
--- Low voltage safety when electric leakage
Function NEW 2023!!!!
--- Can be flow adjust 100 steps Start 70% at 7000 liters/hr display showing 001
--- Real-time display of power consumption
--- Feeding Mode 15 mins. Auto power on after feeding time is over.

1) Before using, Users must check the nameplate on water pump of the rated voltage is consistent with the actual use voltage or not.
2) The power cord of the water pump cannot be replaced, when found the power cord damaged, must not continue to use.
3) When installing or dismantling and cleaning the water pump, must be pull the plug and cut off the power supply to ensure the safety.
4) Please protect the water pump, when severe collision, please check whether the pump is broken, if broken, stop using immediately.
5) Do not leave the pump idling away, it will shortens service life even damage the pump.
6) The pump must use in fresh and sea water, can not be used in any other liquid.

Display Code :
each display +001 = Pump working +0.3% , power +0.6w , flow rate +30 liters/hr.
001 : Pump working at 70% , power 45w , flow rate 7,000 liters/hr.
002 : Pump working at 70.3% , power 45.6w , flow rate 7,030 liters/hr.
003 : Pump working at 70.6% , power 46.2w , flow rate 7,060 liters/hr.
004.....
005.....
100 : Pump working at 100% , power 65w , flow rate 10,000 liters/hr.
P08 : real power 8w
P65 : real power 65w
FEd : Stop temporary 15 minutes
E01 : The pump had problem
E02 : The pump not submerged
E03 : The pump consumes too much current.
E04 : The voltage is lower than 18 volts.
E05 : The voltage is higher than 30 volts.
E06 : The water pump is not found or the connection is incorrect.
NOTE : The power consumption and flow rate are also vary to the pressure of the water. So you can see the actual power consumption on the screen.

Model : AH-10000DC
Voltage input : 220 VAC
Voltage output : 24 VDC (with transformer)
Power : 45-65w
Flow rate Max : 10,000 liters/hr
Height Max : 6.0m

Inlet size : 25mm (1") / 32mm (1-1/4") / 40mm (1-1/2") Hose
Outlet size : 25mm (1") / 32mm (1-1/4") / 40mm (1-1/2") Hose
Power cord from plug to transformer : 1.10 m
Power cord from pump to controller : 1.10 m
Power cord from controller to plug : 2.65 m

Body size with filter grille and bottle plate : L 190 x W 110 x H 155 mm
Package size : L 365 x W 240 x H 130 mm